Surface Mount Pool Light
- Specification
- Installation
- Application
Features
1, Plastic body + PC cover or Stainless steel + PC cover, easy to install;
2, LED: High stability, long life-span;
3, Lens: High light transparency & high uniformity lens;
4, Beam angle: SMD3528-120°, SMD5050-120°, 1W/3W-25°/30°/45°/60°;
5, rojection distance: 10-20 meters;
6, Input Voltage: AC/ DC 12V, Frequency: 50/60HZ;
7, Constant driver: to make sure LED light working stably, avoid flashing or noise; over current protection;
8, Control method: RGB remote control, RGB external control and single color control;
9, IP68 totally waterproof(strictly waterproof test);
10, Color: RGB; Single color – white, red, green, blue, yellow;
11, Life span: >50000 hours.
Parameters
Model No. | MS-SPS-RGB-10518 | MS-SPS-RGB-25215 | MS-SPS-RGB-31518 |
LED | SMD5050 | SMD3528 | SMD3528 |
LED Qty | 105pcs | 252pcs | 315pcs |
Input Voltage | AC/DC 12-13V | ||
Frequency | 50/60 Hz | ||
Power | W:18W RGB:18W R:12W G18W B:18W | W:15W RGB:15W R:12W G15W B:15W | W:18W RGB:18W R:15W G18W B:18W |
Luminous Flux | W:1000-1100lm RGB:430lm R:350lm G:750lm B:180lm | W:800-900lm RGB:430lm R:340lm G:680lm B:150lm | W:1050-1150lm R:400lm RGB:800lm G:200lm B:450lm |
Beam Angle | 120° | ||
Color Temp. | W.W.3000-3500k/ P.W.6000~7000k/ C.W.8000~12000k | ||
Wave Length | R:620-630/ G:515-525/ B:460-470 K/nm | ||
Dimension | Ф295*65mm | ||
Working Temp. | -10°~+50° | ||
IP Rate | IP68 | ||
Packing | 6Pcs/ctn 70*39*39mm; G.W.12kg |
Control: RGB Remote Control, RGB External Control and Single Color Control
1, RGB Remote Control
Remark: RGB signal is strong enough within 50meters and 1 RGB controller could connect 20pcs lamps, if >20pcs, need to add amplifiers to enhance the signal, 1 amplifier could connect 10pcs lamps. Please make sure the power cable is big enough to carry enough voltage (12V AC) avoiding voltage drop. Please refer to following connection diagram.
2, RGB External Control
Remark: The RGB controller's power is 200W, if total lamp wattage is >180W, need to add Amplifier (150W) to enhance RGB signal.
3, Single Color Control(red/green/blue/white)
Simply connect live and neutral wires onto any one of screw terminals on the base of the lamp.
Mainly be used for swimming pool, square, waterfall, pond, park,fountain spring,garden etc.