LED Fountain Light
- Specification
- Installation
- Application
Features
1, 316 stainless steel +transparent PC cover;
2, LED: High stability, long life-span;
3, Lens: High light transparency & high uniformity lens;
4, Beam angle: 1W/3W-25°/30°/45°/60°;
5, Middle hole diameter is 50mm, with 3pcs screws to fix the fountain nozzle;
6, Input Voltage: AC/ DC 12V, Frequency: 50/60HZ;
7, Constant driver: to make sure LED light working stably, avoid flashing or noise; over current protection;
8, Control method: Single color control, DMX512 control, RGB external control;
9, IP68 totally waterproof(strictly waterproof test);
10, Color: RGB; Single color – white, red, green, blue, yellow;
11, Life span: >50000 hours.
Parameters
Model No. | MS-UWFT-RGB-0909 | MS-UWFT-RGB-0915 | MS-UWFT-RGB-1212 | MS-UWFT-RGB-1218 | ||
LED | 1W | 3W | 1W | 3W | ||
LED Qty | 9pcs | 9pcs | 12pcs | 18pcs | ||
Input Voltage | AC/DC 12V | |||||
Frequency | 50/60 Hz | |||||
Output Current | 0.9A | 1.5A | 1.8A | 1.8A | ||
Power | 9W | 15W | 12W | 18W | ||
Luminous Flux | W:600-650lm R:200lm G:420lm B:80lm RGB:270lm | 500lm | W:820-880lm R:260lm G:520lm B:100lm RGB:350lm | 600lm | ||
Color Temp. | W.W.3000-3500k P.W.6000~7000k C.W.8000~12000k | / | W.W.3000-3500k P.W.6000~7000k C.W.8000~12000k | / | ||
Wave Length | R:620-630/ G:515-525/ B:460-470K/nm | |||||
Dimension | Ф179 x 77mm | |||||
Working Temp. | -10~+50 | |||||
Constant Driver | Yes | |||||
IP Rate | IP68 |
Control: Single Color Control, DMX512 Control, RGB External Control
1, Single Color Control
Simply connect live and neutral wires onto any one of screw terminals on the base of the lamp.
2, DMX512 control
DMX512
Controller could connect many lamps, in case signal is not strong
enough after connect too many lamps, use Amplifier to enhance the
signal.
3, External Control
This
control method means external control by LED RGB controller, it is 4
wires cable connection, could control RGB change pattern both by RGB
controller manually and remote.
Remark: RGB Controller power is 200W, if total lamp wattage is above 180W, need to add Amplifier (150W) to enhance RGB signal.